Duracell POWERPACK300 Guía para resolver problemas descargar pdf (Pagina 24)

Using Duracell® Powerpack for the First Time

Using Duracell® Powerpack for the First

Time

Recharging with the AC Charger

Recharging with the AC charger is a true “plug-in-and-

forget” charging method. We recommend leaving the AC

charger connected when the Duracell® Powerpack is not in

use.

To recharge with the AC charger:

1. Disconnect any 12 V DC appliances from the DC power

outlets.

2. Disconnect any AC products from the Duracell®

Powerpack and turn the AC Power

ON/OFF switch to OFF.

3. Insert the AC charger cable end into the AC charger input

socket located under the red jump-starting clamp (see

figure on page 6).

4. Plug the AC charger into a standard AC wall outlet.

Important: Prior to operating your AC appliance or 12 V DC

appliance, ensure that the battery of the Duracell® Powerpack is

fully charged. If the battery has been fully discharged, recharging

with the AC charger may take up to 24 hours.

Note

: The Duracell® Powerpack battery level LEDs are only

accurate when the Duracell® Powerpack has been disconnected

from all appliances and all charging sources for fifteen minutes.

CAUTION

Do not operate AC or DC appliances with the Duracell®

Powerpack while the Duracell® Powerpack is being recharged

with the AC charger.

The AC charger may be permanently damaged if AC appliances or

12 V DC appliances are operated while the AC charger is

connected.

Duracell_PP_300_PlusEP.book Page 11 Wednesday, June 13, 2007 4:02 PM

1 2 ... 19 20 21 22 23 24 25 26 27 28 29 ... 62 63

Sin comentarios

Duracell POWERPACK300 Guía para resolver problemas Pagina 24